DX Coil Module for Size 4 Modular Fans - 7,000 thru 9,650 CFM (40 Ton - 2 Circuit DX Coil, 4EY1103H-52.5x48.0) DXM4-4. NOT BUILT WITH OPP SIDE CONTROLS.
Condenser and condenser disconnect (unless provided on quote) will be installed, started and warranted by others. R410A refrigerant and piping by others. Ensure DX-Kit is ordered for filter drier, sight glass, thermal expansion valve. (Old Heatcraft Coil # 5EJ0904B-52.5x48.0)
DX Coil Module
The DX coil housing has been designed so that there is easy access to
either side of the coil. Oversized doors offer plenty of room through which
to clean and maintain the coil from either side of the housing. The coil sits
over a fully welded stainless steel drip pan that has been sloped so that it
continually drains. Blank off plates and an air distribution screen maintain
proper velocities throughout the housing. The modular design all so lends its
self to easier installations since modules bolt together on location. Single
and dual circuits allow precise capacity control. Unique interlaced circuiting
assures uniform refrigerant distribution over the entire face area of the coil.
Wide fin spacing availability reduces the affect of frost build up in low
temperature applications. For use in central systems or duct application.
Easy access to both sides of the coil making maintenance on the coil easier.
Fully removable access doors on both sides of the housing.
Coil connections protrude from the housing making installation easier.