SpecificationTypical SpecificationsModel:Description:Fan shall be a direct drive, wall mounted, propeller exhaust or supply fan. Standard Construction:Fan shall be of riveted and bolted construction utilizing corrosion resistant fasteners. The unit shall include a heavy gauge G90 galvanized steel fan panel with an integral venturi. The fan panel shall have pre-punched mounting holes for ease of installation. The fan shall bear a permanently attached nameplate displaying model and serial number of unit for future identification. The unit shall be factory tested after assembly. Propeller:Precision pitched propeller shall be fabricated steel or cast aluminum blades attached to a heavy duty hub. The hub shall be securely fastened to the motor shaft utilizing two setscrews or split tapered bushings. Propeller shall be balanced in accordance with AMCA Standard 204-96, Balance Quality and Vibration Levels for Fans. Motors & Electrical:Motor shall be heavy-duty type with permanently lubricated sealed bearings furnished at the specified voltage, phase, and enclosure. Motors should be nationally recognized brands either open drip-proof, totally enclosed, or explosion proof. Options and Accessories:Optional accessories shall be provided either factory installed or field installed as detailed in the fan schedules. Certifications:Fan shall be listed by Underwriters Laboratories (cULus 705), for US and Canada when specified in the fan schedule. Warranty:The equipment is warranted to be free from defects in materials and workmanship, under normal use and service, for a period of 24 months from the date of shipment. Product:Fan shall be model as manufactured by |