The DX coil housing has been designed so that there is easy access to either side of the coil. Oversized doors offer plenty of room through which to clean and maintain the coil from either side of the housing. The coil sits over a fully welded stainless steel drip pan that has been sloped so that it continually drains. Blank off plates and an air distribution screen maintain proper velocities throughout the housing. The modular design all so lends its self to easier installations since modules bolt together on location. Single and dual circuits allow precise capacity control. Unique interlaced circuiting assures uniform refrigerant distribution over the entire face area of the coil. Wide fin spacing availability reduces the affect of frost build up in low temperature applications. For use in central systems or duct application.