|
|
TYPICAL SPECIFICATIONS |
Model:
|
CFA-CA
|
|
Description:
|
Fan shall be galvanized steel, ceiling mounted, forward curved,
direct drive, exhaust fan. Optional inline adapter is available
to convert to inline type.
|
|
Certifications:
|
Fan shall be listed by Underwriters Laboratories. Fan shall
bear the AMCA certified ratings seal for sound and air performance.
|
|
Construction:
|
Housing
|
The fan housing shall be constructed of 20 gauge galvanized steel and
include 1/2" thick acoustic insulation inside. The fan housing shall include
an automatic backdraft damper on the discharge side of the fan located
within the duct connector. Two, 8-position mounting brackets shall be
provided for ease of installation. The fan may be installed in ceiling
or wall size permitting. Decorative grille included with fan.
|
|
Wheel
|
The fan wheel shall be forward curved, dynamically balanced,
polymeric centrifugal wheel for quiet, efficient performance.
The wheel(s) shall be firmly attached to the motor shaft with
set screws.
|
|
Motor
|
Standard 115 volt, open drip motors shall be permanently
lubricated, rated for continuous duty and thermally protected.
Motors shall be mounted on vibration isolators to minimize noise
and vibration. The motor disconnect shall be internal and of the
plug type.
|
|
Product: Fan shall be model CFA-CA as manufactured by
CaptiveAire Systems.
|
|
|