|
|
TYPICAL SPECIFICATIONS |
Model: |
DDAR-FA |
|
Description: |
Fan shall be a spun aluminum, roof or wall mounted,
direct drive, downblast, axial exhaust ventilator.
|
|
Certifications: |
Fan shall be ETL Listed and comply with UL705 (electrical) Standards and CSA Std C22.2, No 113.
Fan shall bear the AMCA certified ratings seal for air performance. |
|
Construction: |
|
Housing |
The fan housing shall be constructed of heavy gauge aluminum and shall be spun on an
automatic lathe to provide consistent dimensions. Heavy gauge aluminum braces shall
provide a sturdy support for the motor. The discharge cap shall have a rolled bead
for added strength. |
|
Base |
The base shall be constructed of galvanized steel. Base corners shall be welded to
provide strength and to prevent leakage into the building.
|
|
Propeller |
The propeller shall be a high efficiency type fabricated design. Blades are to
die formed and securely fastened to a heavy gauge steel hub. Propeller shall
be securely fastened to the fan shaft with set screws. The propeller shall be
balanced in accordance with AMCA standard 204-96, Balance Quality and Vibration
Levels for Fans. |
|
Motor & Motor Compartment |
Motors shall be permanently lubricated and rated for continuous duty. An
integral electrical conduit running from the fan base to the motor area is
provided for ease of installation.
|
|
Product: Fan shall be model DDAR-FA as manufactured by CaptiveAire Systems. |
|
|