AM-ND-2 Series
|
|
Exhaust Ventilator
|
AquaMatic's wall canopy exhaust only ventilator, Model AM-ND-2, is for use over cooking equipment producing heat and grease laden effluent.
The AM-ND-2 is an ETL Listed, Type I hood and is rated for use over 450, 600 and 700 degree F cooking appliances. The aerodynamic design ensures robust capture and containment, as well as superior exhaust flow rates.
|
|
|
- ETL Listed and ETL Sanitation Listed
- Wall Only or Back-to-back configurations available
- Exceptional capture and containment of cooking vapors
- Insulated, double-wall front
- Mechanical Baffle to direct effluent into the filter bank
- Grease drain system with removable 1/2 pint cup
- Pre-punched hanging angles for easy installation
- Factory pre-wired, incandescent light fixtures
|
|
|
- Integral Utility Cabinet
- Optional Make-up Air via Perforated Supply Plenum (PSP) or Dual Plenum (AC-PSP)
- Optional Make-up Air via Rear Plenum
- Optional Self Cleaning Technology
- UL 300 Fire Suppression including revolutionary CORE Protection System
- Electrical Controls and Face Mounted Control Panel
- Enclosure Panels to the Ceiling
- Filtration – Captrate Combo, Captrate Solo, Standard Baffle, High Velocity Cartridge
- Lighting – Recessed Incandescent, Recessed Fluorescent, Compact Fluorescent, Recessed LED, Halogen
- Exhaust and/or Make-up Air Fans
|
|
|
450�F - Ovens,
Steamers, Kettles, Open-Burner Ranges, Griddles, Fryers
|
Single Wall Hood
2 Wall Hoods, Back-to-Back
|
150 300 |
Exhaust - Based
on 1500 FPM |
600�F - Gas Charbroilers, Electric Charbroilers
|
Single Wall Hood
2 Wall Hoods, Back-to-Back
|
200 400 |
700�F - Mesquite Grills, Charcoal Charbroilers,
Gas Conveyor Charbroilers, Wood Burning Appliances
|
Single Wall Hood
2 Wall Hoods, Back-to-Back
|
250 500 |
|
|
|
|
|
|
The AM-ND-2 Model has been certified by ITS. This certification mark indicates that
the product has been tested to and has met the minimum requirements of a widely recognized
(consensus) U.S. and Canadian products safety standard, that the manufacturing site
has been audited, and that the applicant has agreed to a program of periodic factory
follow-up inspections to verify continued performance.
|
|
|
Model AM-ND-2 is ETL Listed under file number 102900319PRT-001 and complies with UL710, ULC710 and ULC-S646 Standards.
|
|
|