Rep Our Products

Are you interested in representing CaptiveAire and selling our products?
Please fill out the following form, and we will contact you soon.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 

AM-NDI Series

Exhaust Island Ventilator

AquaMatic's single island exhaust only ventilator, Model AM-NDI, is for use over cooking equipment in an island configuration, such as display cooking.

The AM-NDI is an ETL Listed, Type I hood for the removal of equipment producing heat and grease laden effluent. The hood is rated for use over 400, 600 and 700 degree F cooking appliances.

AM-NDI Hood

Features

  • ETL Listed and ETL Sanitation Listed
  • Type 304 Stainless Steel Construction Standard
  • Exceptional capture and containment of cooking vapors
  • Insulated, double-wall front and back with mechanical baffle to direct effluent back into the filter bank
  • Double-wall, insulated 1" standoff on the ends
  • Grease drain system with removable 1/2 pint cup
  • Pre-punched hanging angles for easy installation
  • Factory pre-wired, incandescent light fixtures

Options

  • Integral Utility Cabinet
  • Optional Make-up Air via Perforated Supply Plenum (PSP) or Dual Plenum (AC-PSP)
  • Fire Suppression System
  • Electrical Controls and Face Mounted Control Panel
  • Enclosure Panels to the Ceiling
  • Filtration - Captrate Combo, Captrate Solo, Standard Baffle
  • Lighting - Compact Fluorescent or Halogen (45" width and above); Recessed Incandescent, Fluorescent and LED (72" width and above)
  • Exhaust and/or Make-up Air Fans

Performance Data

Avg. Cooking Surface Temp. (�F) Min Exhaust CFM/ft Recommended Duct Sizing
400�F - Ovens, Steamers, Kettles, Open-Burner Ranges, Griddles, Fryers 346 Exhaust - Based on 1500 FPM
600�F - Gas Charbroilers, Electric Charbroilers, Woks 422
700�F - Mesquite Grills, Charcoal Charbroilers, Wood Burning Appliances 475