The model VH-1 is a single wall type vent hood for non-grease applications or for the removal of heat, vapor, etc.  Hood shall have size, shape and performance specified on drawings.

Construction shall be type 304 stainless steel with a #3 or #4 polish where exposed.  Hood shall be wall type with full length hanging angles with 9/16" holes pre-punched in 1 ½" x 1 ½" angle iron at the factory to allow for hanger rod connection by others.

The hood manufacturer shall supply complete submittal drawings including hood sections view(s) and hood plan view(s).  These drawings must be available to the engineer, architect and owner for their use in construction, operation and maintenance.

Exhaust duct collar to be 4" high with 1" flange. Duct sizes, CFM and static pressure requirements shall be as shown on drawings.

• Enclosure Panels
• Full Perimeter Gutter