Rep Our Products

Are you interested in representing CaptiveAire and selling our products?
Please fill out the following form, and we will contact you soon.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 
MUA RE-CIRCULATION SPRAY/BAKE SEQUENCE

"SPRAY"
POWER ON LIGHT ENERGIZED
  • IF EQUIPPED, MAKE-UP AIR UNITíS DAMPER (INTAKE OR DISCHARGE) IS ENERGIZED; END SWITCH ON DAMPER ACTUATOR IS MADE WHEN DAMPER IS 75% OPEN

START DELAY TIMER ENERGIZED
  • IF EQUIPPED WITH EXHAUST FAN STARTERS, HIGH SPEED STARTER FOR TWO SPEED EXHAUST MOTORS IS ENERGIZED OR BOTH EXHAUST FAN MOTOR STARTERS FOR TWO SINGLE SPEED EXHAUST FANS
  • IF EQUIPPED WITH EXHAUST AUTO BALANCE SYSTEM, VFD IS ENABLED AND STATIC PRESSURE CONTROLLER OVERRIDDEN TO FORCE EXHAUST FAN VFD TO HIGH SPEED

START DELAY TIMER TIMES OUT
  • MAKE-UP AIR UNITS SUPPLY FAN STARTER ENERGIZED.
  • AFTER AIRFLOW IS PROVEN "BLOWER LIGHT" IS ENERGIZED
  • RE-CIRCULATION SYSTEMS MODULATION DAMPERS ARE IN 100% OUTSIDE AIR MODE
  • IF EQUIPPED WITH AUTO BALANCE SYSTEM, STATIC PRESSURE CONTROLLER CONTROLS EXHAUST FAN VFD BASED UPON BOOTH PRESSURE REQUIREMENTS
  • SPRAY LIGHT ENERGIZED
  • BURNER ENABLED VIA THE MANUAL "HEAT ON/OFF" SWITCH
  • "BURNER LIGHT" ENERGIZED IF HEAT IS "ON"
  • SET POINT ONE ENABLED ON "M" SERIES TEMPERATURE CONTROLLER

"BAKE"
PURGE CYCLE TIMER ENERGIZED
  • PURGE LIGHT ENERGIZED
  • NO CHANGE IN MAKE UP AIR UNIT OR EXHAUST FAN OPERATION
PURGE CYCLE TIMER TIMES OUT
BAKE TIMER ENERGIZED
  • RE-CIRCULATION SYSTEMS (80/20) DAMPER POSITIONING MANUAL POTENTIOMETER IS ENABLED AND DAMPERS ADJUSTS TO POTENTIOMETERS SETTING.
  • BURNER IS ENABLED
  • "BURNER LIGHT" ENERGIZED
  • IF EQUIPPED WITH EXHAUST STARTERS, LOW SPEED STARTER ENERGIZED FOR TWO SPEED EXHAUST MOTOR OR ONE EXHAUST FAN STARTER IS DE-ENERGIZED ON TWO SINGLE SPEED EXHAUST FAN SYSTEMS
  • IF EQUIPPED WITH EXHAUST AUTO BALANCE SYSTEM, STATIC PRESSURE CONTROLLER CONTROLS EXHAUST FAN VFD BASED UPON BOOTH PRESSURE REQUIREMENTS
  • BAKE LIGHT ENERGIZED
  • SET POINT TWO ENABLED ON "M" SERIES TEMPERATURE CONTROLLER
  • BOOTH LIGHTS LOCKED OUT
BAKE CYCLE TIMES OUT
COOL DOWN TIMER ENERGIZED
  • COOL DOWN LIGHT ENERGIZED
  • RE-CIRCULATION SYSTEMS (80/20) MODULATION DAMPERS ARE IN 100% OUTSIDE AIR MODE
  • BURNER ENABLED VIA THE MANUAL "HEAT ON/OFF" SWITCH
  • "BURNER LIGHT" ENERGIZED IF HEAT IS "ON"
  • IF EQUIPPED WITH EXHAUST FAN STARTERS, HIGH SPEED STARTER FOR TWO SPEED EXHAUST MOTORS IS ENERGIZED OR BOTH EXHAUST FAN MOTOR STARTERS FOR TWO SINGLE SPEED EXHAUST FANS
  • IF EQUIPPED WITH EXHAUST AUTO BALANCE SYSTEM, VFD IS ENABLED AND STATIC PRESSURE CONTROLLER OVERRIDDEN TO FORCE EXHAUST FAN VFD TO HIGH SPEED
  • SET POINT ONE ENABLED ON "M" SERIES TEMPERATURE CONTROLLER

COOL DOWN CYCLE COMPLETE
MAKE UP AIR UNIT AND EXHAUST SYSTEM SHUTS OFF
BOOTH LIGHTS ENERGIZED