|
Lookup Part! - 12A06
|
1/8" NPT Vent Limiting Orifice Brass Plug– used on TANK fire suppression system at end of PAK-SVA actuation lines to prevent gradual buildup of actuation pressure. Must be torqued to 30 in-lbs.
|
|
|
|
Lookup Part! - 1INCHDPMANIFOLD
|
1" Duct & Plenum Protection Manifold Assembly, Manifold Will Ship Loose & Require Field Installation. See Fully Integrated Self Cleaning System Detail For Assembly Instructions, Page 21. Manifold Must Ship Fully Assembled.
|
|
|
Lookup Part! - 1INCHWMUCMANIFOLD
|
1" Wall Mount Duct & Plenum Protection Manifold Assembly, Manifold Will Be Installed In Wall Mounted Utility Cabinet. See Fully Integrated Self Cleaning System Detail For Assembly Instructions, Page 29. Manifold Must Ship Fully Assembled.
|
|
|
Lookup Part! - 33M674
|
MASTER APPLIANCE Heat Gun Attachment: Shrink Attachment, 1 3/4 in Outside Dia, Heat Shrink Tubing - Used On 360F & 600F Fire Stat Testing. Compatible With Model Numbers - HG-201AK; HG-301AK; HG-501AK; HG-751BK; VT-750CK; VTS-750; VTS-752.
|
|
|
Lookup Part! - 33M679
|
MASTER APPLIANCE Heat Gun Attachment: Solder Preform, 1 3/4 in Outside Dia, Heat Seal Connectors - Used On 360F & 600F Fire Stat Testing. Compatible With Model Numbers - HG-201A; HG-201A-MC; HG-201AK; HG-202A; HG-301A; HG-301A-MC; HG-301AK; HG-302A; HG-501A; HG-501A-MC; HG-501AK; HG-502A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lookup Part! - C-032
|
Sporlan Catch-All refrigerant filter dryer. Inline male-to-male flare fitting for TANK PAK testing. 100mesh screen and 20micron polyester pad on the outlet. Rated up to 650psi.
|
|
|
Lookup Part! - Caster-Lock
|
Safety Set Caster Lock for all rolling appliances. For use with 4 to 6 inch casters. Includes all mounting hardware needed for installation. 1 pair.
|
|
|
|
|
|
|
|
Lookup Part! - CW-1525
|
Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2", 3/4" and 1" Jaw Copper Pipe Propress Crimper Pressing Pliers
|
|
|
Lookup Part! - CW-VOTOER
|
VOTOER - Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2", 3/4" and 1" Jaw Copper Pipe Propress Crimper Pressing Pliers.
|
|
|
Lookup Part! - DISFLEXHOSE
|
Agent Distribution Hose & Restraining Cable Kit. Contains 5' Hose, 3' Restraining Cable & Hardware. 1/2" Hose with 3/8" NPT Fittings.
|
|
|
|
|
|
|
|
|
Lookup Part! - PGW-500
|
Elitech wireless digital pressure gauge used for testing TANK PAK assemblies. -14.5 to 500psi range. +/-0.5psi resolution.
|
|
|
Lookup Part! - PT-500/800PRO+
|
Elitech wireless digital pressure gauge used for testing TANK PAK assemblies. PT500 - 14.5 to 500 psi range & PT800 - 14.5 to 800 psi range . +/-0.5psi resolution.
|
|
|
Lookup Part! - PT500-G1
|
Pressure Transmitter – Gas Nitrogen: (24V DC, 0-10VDC Signal) 0 – 500 PSI Gas Nitrogen Pressure Transducer. 7/16-20 UNF Female, HEX 5/8" SAE (1/4" Flare W/Schrader Depressor) - Monitors Tank Pressure, ECPM04 Only Supervised Signal, Tank Fire Suppression.
|
|
|
|
|
|
Lookup Part! - TANK FS- Kit for Distributors
|
TANK Fire Suppression Full Fire System Service Kit for FS Distributors, Includes Pro Press Tool, Regulator, Hoses, Fittings, Pressure Gauge, Qty-2 tanks, Primary Actuator Kit, 15 in-lb, 30 in-lb, and 75 in-lb Torque Wrenches and Batteries. REQUIRED FOR CERTIFIED TECHNICIANS.
|
|
|
|
|
Lookup Part! - TF1
|
NOZZLE, Total Flood Protection w/ Foil Seal Cap, CAS Electrical Wet Chemical
|
|
|
|
Lookup Part! - TWAF-5815
|
Pre-set torque wrench, full head, 5/8" 15 in-lbs, blue handle. Used on TANK PAK Hex hose fitting.
|
|
|
|
Lookup Part! - WD2-12
|
Worm-Drive hose clamp adjustable diameter from 2" to 12" (McMaster Carr Part #5322K24; A/X #A0004288)
|
|
|
Miscellaneous Fire Suppression Parts
