Rep Our Products

Are you interested in representing CaptiveAire and selling our products?
Please fill out the following form, and we will contact you soon.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 
     
  Parts > Kitchen Ventilation > Electrical Parts > BMS&Monitoring  
     

Sort by:   
 
 BMS&Monitoring
 
     
CaptiveAire Systems
www.captiveaire.com
     
** Please call for pricing or to purchase **
 
Part # & Description
Lookup Part!  - 2J7724Ba
Cellular Antenna Accessory. paddle antenna to be used with cellular modules

Lookup Part!  - A/CTV-250
Current Sensor Analog Output A/CTV-250, Solid Core. Adjustable 100 to 250 AMP with 0-10v DC output relative to range. For use with building electircal consumption monitoring systems.

Lookup Part!  - A/CTV-50
Current Sensor Analog Output A/CTV-50, Solid Core. Adjustable 10 to 50 AMP with 0-10V DC output relative to range. For use with building electircal consumption monitoring systems.

Lookup Part!  - A/R2-PUP
Pressure pick up port, plastic white wall mount housing. For use with 1/8" airline tubing.

Lookup Part!  - A/SP-PUP
Pressure pick up port, stainless steel wall mount housing. For use with 1/8" airline tubing.

Lookup Part!  - AC-PSP_STAT
AC-PSP thermostat kit, includes 1x duct thermostat, quick seal, and j-box for monitoring of AC-PSP discharge temperature.

Lookup Part!  - CAS_BACNET_GATEWAY
BMS Gateway for BACNET MS/TP or BACNET IP. Includes CAS_GATEWAY circuit board and Protocessor BACnet interface. For use with PEM mounting standoffs. Not rated for use outside of an enclosure. When ordered as a part, specify MS/TP or IP in programmable part notes. PART REQUIRES PROGRAMMING!

Lookup Part!  - CAS_BACNET_GATEWAY_FAN
BMS Gateway for BACNET MS/TP or BACNET IP. Includes CAS_GATEWAY circuit board and Protocessor BACnet interface. For use with PEM mounting standoffs. Not rated for use outside of an enclosure. When ordered as a part, specify MS/TP or IP in programmable part notes. PART REQUIRES PROGRAMMING!

Lookup Part!  - Cellular_Antenna(wired)
Cellular Antenna Accessory. low profile antenna with a 1m long wire, to be used with prewires and places where cell connection is weak.

Lookup Part!  - Cellular_NetComm_AT&T_kit
NetComm wireless 3G cellular module. Includes cellular module, 2 SMA antennas, Din rail mounting bracket, screw termination blocks, Cat5 yellow cable and Quick start guide. NO SIM INCLUDED WITH MODULE ONLY. Please contact Engineering for SIM.

Lookup Part!  - Cellular_NetComm_AT&T_module
NetComm wireless 3G cellular module. Includes cellular module, 2 SMA antennas, Din rail mounting bracket, screw termination blocks, Cat5 yellow cable and Quick start guide. NO SIM INCLUDED WITH MODULE ONLY. MUST ORDER KIT FOR SIM.

Lookup Part!  - Cellular_NetComm_Verizon_kit
NetComm wireless 4G cellular module. Includes cellular module, 2 SMA antennas, Din rail mounting bracket, screw termination blocks, Cat5 yellow cable and Quick start guide. Includes Verizon sim card.

Lookup Part!  - Cellular_NetComm_Verizon_module
NetComm wireless 4G cellular module. Includes cellular module, 2 SMA antennas, Din rail mounting bracket, screw termination blocks, Cat5 yellow cable and Quick start guide. NO SIM INCLUDED WITH MODULE ONLY. MUST ORDER KIT FOR SIM.

Lookup Part!  - Cellular_simcard
Cold Verizon sim card (size 2ff).

Lookup Part!  - FPC-N35-103-401-0862
Protonode Modbus to LONWORKS converter. MUST BE PROGRAMMED.

Lookup Part!  - FPC-N35-103-401-0862_FAN
Protonode Modbus to LONWORKS converter. Only to be used with fans. MUST BE PROGRAMMED (FS-QS-1211-0085 is a direct substitute)

Lookup Part!  - FS105NA
SWITCH ETHERNET 5-PORT FAST NETGEAR PROSAFE FS105NA

Lookup Part!  - IMACP01
120V Din Rail Mounted Outlet for use with field mounting of Cradlepoint or Ethernet Switches.

Lookup Part!  - PSP_STAT
PSP thermostat kit, includes 1x duct thermostat, quick seal, and j-box for monitoring of PSP discharge temperature.

Lookup Part!  - RTUlink_Control_Kit
RTUlink RTU Control Assembly with discharge, intake, and return air sensors. Includes mounting hardware. Order space stat separately if utilizing CASlink for thermostatic control.

Lookup Part!  - SPM2
Space Pressure Module version 2. Board is made for use with Building Control & Monitoring Systems to monitor two pressure locations in real time. Monitors up to 2 separate space compared to ambient and provides 4 sets of dry contacts to drive external damper/VFD. Add 3 feet of whip with black, white and green wires to power the SPM2 board.

Lookup Part!  - WM-PC-075-R/1P
3/4" PLASTIC MULTI-JET water meter (GPM). Lead Free. For use with STM pulsed input. Provides pulsed output for CASlink. Potable water safe. Mount horizontally at a safe distance from hood.

Lookup Part!  - WM-PC-100-R/1P
1" PLASTIC MULTI-JET water meter (GPM). Lead Free. For use with STM pulsed input. Provides pulsed output for CASlink. Potable water safe. Mount horizontally at a safe distance from hood.

 
     
Dwyer
     
** Please call for pricing or to purchase **
 
Part # & Description
Lookup Part!  - WM-PC-075-R/1P
3/4" PLASTIC MULTI-JET water meter (GPM). Lead Free. For use with STM pulsed input. Provides pulsed output for CASlink. Potable water safe. Mount horizontally at a safe distance from hood.

Lookup Part!  - WM-PC-100-R/1P
1" PLASTIC MULTI-JET water meter (GPM). Lead Free. For use with STM pulsed input. Provides pulsed output for CASlink. Potable water safe. Mount horizontally at a safe distance from hood.