A/CTV-250
|
Current Sensor Analog Output A/CTV-250, Solid Core. Adjustable 100 to 250 AMP with 0-10v DC output relative to range. For use with building electircal consumption monitoring systems.
|
|
|
A/CTV-50
|
Current Sensor Analog Output A/CTV-50, Solid Core. Adjustable 10 to 50 AMP with 0-10V DC output relative to range. For use with building electircal consumption monitoring systems.
|
|
|
A/R2-PUP
|
Pressure pick up port, plastic white wall mount housing. For use with 1/8" airline tubing.
|
|
|
A/SP-PUP
|
Pressure pick up port, stainless steel wall mount housing. For use with 1/8" airline tubing.
|
|
|
AC-PSP_STAT
|
AC-PSP thermostat kit, includes 1x duct thermostat, quick seal, and j-box for monitoring of AC-PSP discharge temperature.
|
|
|
CAS_BACNET_GATEWAY
|
BMS Gateway for BACNET MS/TP or BACNET IP. Includes CAS_GATEWAY circuit board and Protocessor BACnet interface. For use with PEM mounting standoffs. Not rated for use outside of an enclosure. When ordered as a part, specify MS/TP or IP in programmable part notes. PART REQUIRES PROGRAMMING!
|
|
|
CAS_BACNET_GATEWAY_FAN
|
BMS Gateway for BACNET MS/TP or BACNET IP. Includes CAS_GATEWAY circuit board and Protocessor BACnet interface. For use with PEM mounting standoffs. Not rated for use outside of an enclosure. When ordered as a part, specify MS/TP or IP in programmable part notes. PART REQUIRES PROGRAMMING!
|
|
|
Cellular_Antenna(wired)
|
Cellular Antenna Accessory. low profile antenna with a 1m long wire, to be used with prewires and places where cell connection is weak.
|
|
|
Cellular_NetComm_AT&T_kit
|
NetComm wireless 3G cellular module. Includes cellular module, 2 SMA antennas, Din rail mounting bracket, screw termination blocks, Cat5 yellow cable and Quick start guide. NO SIM INCLUDED WITH MODULE ONLY. Please contact Engineering for SIM.
|
|
|
Cellular_NetComm_AT&T_module
|
NetComm wireless 3G cellular module. Includes cellular module, 2 SMA antennas, Din rail mounting bracket, screw termination blocks, Cat5 yellow cable and Quick start guide. NO SIM INCLUDED WITH MODULE ONLY. MUST ORDER KIT FOR SIM.
|
|
|
Cellular_NetComm_Verizon_kit
|
NetComm wireless 4G cellular module. Includes cellular module, 2 SMA antennas, Din rail mounting bracket, screw termination blocks, Cat5 yellow cable and Quick start guide.
Includes Verizon sim card.
|
|
|
Cellular_NetComm_Verizon_module
|
NetComm wireless 4G cellular module. Includes cellular module, 2 SMA antennas, Din rail mounting bracket, screw termination blocks, Cat5 yellow cable and Quick start guide. NO SIM INCLUDED WITH MODULE ONLY. MUST ORDER KIT FOR SIM.
|
|
|
Cellular_simcard
|
Cold Verizon sim card (size 2ff).
|
|
|
FPC-N35-103-401-0862
|
Protonode Modbus to LONWORKS converter. MUST BE PROGRAMMED.
|
|
|
FPC-N35-103-401-0862_FAN
|
Protonode Modbus to LONWORKS converter. Only to be used with fans. MUST BE PROGRAMMED (FS-QS-1211-0085 is a direct substitute)
|
|
|
FS105NA
|
SWITCH ETHERNET 5-PORT FAST NETGEAR PROSAFE FS105NA
|
|
|
IMACP01
|
120V Din Rail Mounted Outlet for use with field mounting of Cradlepoint or Ethernet Switches.
|
|
|
PSP_STAT
|
PSP thermostat kit, includes 1x duct thermostat, quick seal, and j-box for monitoring of PSP discharge temperature.
|
|
|
RTUlink_Control_Kit
|
RTUlink RTU Control Assembly with discharge, intake, and return air sensors. Includes mounting hardware. Order space stat separately if utilizing CASlink for thermostatic control.
|
|
|
SPM2
|
Space Pressure Module version 2. Board is made for use with Building Control & Monitoring Systems to monitor two pressure locations in real time. Monitors up to 2 separate space compared to ambient and provides 4 sets of dry contacts to drive external damper/VFD. Add 3 feet of whip with black, white and green wires to power the SPM2 board.
|
|
|
WM-PC-075-R/1P
|
3/4" PLASTIC MULTI-JET water meter (GPM). Lead Free. For use with STM pulsed input. Provides pulsed output for CASlink. Potable water safe. Mount horizontally at a safe distance from hood.
|
|
|
WM-PC-100-R/1P
|
1" PLASTIC MULTI-JET water meter (GPM). Lead Free. For use with STM pulsed input. Provides pulsed output for CASlink. Potable water safe. Mount horizontally at a safe distance from hood.
|
|
|
BMS&Monitoring
