Rep Our Products

Are you interested in representing CaptiveAire and selling our products?
Please fill out the following form, and we will contact you soon.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 
 
Fully Integrated Self Cleaning Hood

The Fully Integrated Self Cleaning Hood helps keep your kitchen ventilation system clean with maximum grease extraction efficiency. The system is available with CaptiveAire’s premier line including wall canopy, sloped wall canopy and backshelf models. The Self Cleaning Hood contains the spray bar, which extends the full length of the hood immediately behind the filters. The spray bar is fitted with nozzles that spray towards the back of the hood.
 
   Options Available    
The Hot Water option automatically cleans the hood plenum after the cooking operations are completed for the day. By washing the plenum while the hood is hot, wash and cleaning effectiveness increases. Surfactant will be injected into the wash for one second, every one minute of the cycle. The wash time is adjustable to meet the needs of every application.
 
The Cold Water Mist option automatically cools exhaust gasses and aids in the removal of grease vapor. While the hood is in operation, a fine water mist is sprayed into the plenum.
 
The Cold Water Mist with Hot Water Wash option combines the best of both systems - immediately cooling the gasses in the plenum during operation and then washing the plenum down while the hood is still hot at the end of the day.
 
   Locations for Manifold and Wash Control    
Integral Utility Cabinet option includes the manifold and electrical controls directly mounted into the cabinet on either end of the hood. All piping and wiring are done in the factory to minimize labor at the job site. The manifold size available is 3/4" and covers up to eighty feet of hood, depending on operational water pressure.
Remote Manifold and Controls are available when the design of the application does not allow for a utility cabinet on the end of the hood. The manifold and controls can be ordered in a remote cabinet and piped to the hood at the jobsite. The panel includes a combination pressure/temperature gauge, shock absorber, pressure reducing valve, water solenoid valve, surfactant pump, line strainer, ball valve and surfactant tank.
 
Two options for the remote manifold and controls are available. The AM-2 Panel offers simple controls of the self cleaning operation while the SCS Panel includes advanced controls via a touch screen interface.
   Features and Benefits    
  • ETL and ETL Sanitation Listed Product
  • Fully automatic operation
  • Hood fabricated from 100% Stainless Steel
  • Drip-less nozzles with internal strainer
  • Easily serviceable
  • Adjustable wash length (factory set at 3 minutes)
  • 3/4" NPT Pipe Water Inlet connection
  • 1 1/2" NPT Pipe Water Drain connection
  • Standard riser spray nozzle for duct cleaning
  • Available EMS control package to reduce fan loads during idle periods
  • Water usage is 0.70 GPM per foot of hood
  • Replacement parts and detergent available from the CaptiveAire catalog
  • Upgrade to the CORE Fire System available
 
   Additional Information    
 
   Certifications    
The ND-2, SND-2 and CSND-2 Models have been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance. Models are ETL listed under file number 3054804-001.