20AC1RPL
|
Single Pole Switch 120V, 20 AMP with red pilot toggle. Used for fan on/off and summer/winter heater control. (A0009017)
|
|
|
616KD-00-V-PT
|
616KD 00 V - Pressure Transmitter, Pressure Range (In. WC) 0-1, Output 0-5/ 0-10 V, Power Required 16 to 35 VDC, 20 to 28 VAC, Connection Barbed,Dual Size to Fit 1/8 In. and 3/16 In. (3 mm & 5 mm) ID Rubber or Vinyl Tubing, Loop Resistance DC at 1000 Ohms Max,AC at 1200 Ohms Max, Output Accuracy +/-2 Percent FS.
|
|
|
721-104
|
PLUG, 4 POSITION 721-104/026-000
|
|
|
A/MLP2-005-W-B-A-C-0P
|
ACI- MLP2 Series Low Differential Pressure transmitters, pressure range of - 5" w.c. to + 5" w.c. low temperature version. Sensor has brass fittings.
Accepts 0.25 O.D. x 0.17 I.D. Push On.
|
|
|
A/MLP2-015-W-B-A-C-0P
|
ACI- MLP2 Series Low Differential Pressure transmitters, pressure range of - 15" w.c. to + 15" w.c. low temperature version. Sensor has brass fittings.
Accepts 0.25 O.D. x 0.17 I.D. Push On.
|
|
|
A/MLP2-D25-W-B-A-C-0P
|
ACI- MLP2 Series Low Differential Pressure transmitters, pressure range of - .25" w.c. to + .25" w.c. low temperature version. Sensor has brass fittings.
Accepts 0.25 O.D. x 0.17 I.D. Push On.
|
|
|
A3300-0-LT
|
Photohelic pressure differential guage (gauge only, accessories listed below), dual relay, pressure range of -.25" w.c. to .25" w.c. low temperature version, standard 80/20 guage. "RPPHOTOHELIC" includes remote mounting box. "A-306" contains pressure kit.
|
|
|
A3302
|
Photohelic pressure differential gauge, dual relays, range of -1" w.c. to 1" w.c.
|
|
|
H46C1166/U
|
Wall mounted dehumidistat, 20-80% set point range, 24/120/240 vac, spst contact ratings of 7.5 amps fla/12a resistive @ 120v, 4-6% rh differential,
|
|
|
KEY_LOAD_CENTER_UDS
|
Replacement Load Center Key For UDS
|
|
|
R2131C5-NWCA blank
|
SWITCH - Blank Toggle for Rocker switch used on hoods
|
|
|
R5CBLKBLKEF0
|
DPDT ON-ON rocker switch for 24 volt PCU CORE. 6 spade terminals, 373 J
To replaced obsolete Part # RB24GD1100
|
|
|
RB242D1000-117
|
SWITCH - Red Double Pole Lighted Switch Used For Fan Switch, 120/277 VAC, 20 AMP, Rocker switch, No Markings. (Replaces R2131C5LBRZNWCA)
|
|
|
RB242D1100
|
SWITCH - Black Double Pole Switch Used For Hood Lights, 120/277 VAC, 20 AMP, Rocker switch, 4 spade terminals, 283 J. (Replaces R2131C5NBBZNWCA).
|
|
|
RB246C1100
|
SWITCH - 3 position, DPDT ON/OFF/ON/ROCKER switch used with new style NHMUA and A series units. No base needed.
|
|
|
RRUPONAUTO
|
complete on/auto switch w/nc & no contact
|
|
|
SC-CAS-retro
|
Hood light and fan switch plate, light & fan switches, junction boxes, 36" conduit with all connectors for field installation for new style light & fan switches. 16g SS Screen printed cover plate.
|
|
|
SC-CAS-retrolight
|
Hood light switch plate, light switch, junction boxe, 36" conduit with all connectors for field installation for new style light switche. 16g SS Screen printed cover plate.
|
|
|
Service switch
|
toggle test switch used for both burner and blower test switch 20a 125v-220v
|
|
|
TAMPER-DOOR-SWITCH-UDS
|
Tamper Door Switch For Use With UDS
|
|
|
UD1210
|
Kill switch base with contacts.
|
|
|
ZB5AV6-120
|
Light Base used on Paint Booth Control Panels (pilot light module).
|
|
|
ZB5AW061LAMP
|
Lamp used on a ZB5AW061 light module with attached contact block, 120V, 2.6W, used on Paint Booth panels (price each - each box contains 10).
|
|
|
ZB5AW34
|
Lighted push button (red with flush head)
|
|
|
Switches
