This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
CASRE
Up-Blast Centrifugal Utility Set
Air Volume: 100 - 8,000 cfm | Maximum SP: 5" wg. @ standard air densityDrawings
- Revit Model
- Submittal Drawing with Rain Cap
- Submittal Drawing with Adjustable Extension
- Exploded Parts Detail
- Exploded View Belt Drive
- Exploded View Direct Drive
- Exploded View Hardware
- Exploded View Rain Cap Option
- Exploded View Interlock Switch
- Exploded View Extension Option
- Disconnect Arm Retro Instructions
Additional Information
Field Installations
Certifications
CaptiveAire certifies that Models CASRE11 through CASRE24 are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and 311 and comply with the requirements of the AMCA Certified Ratings Program. Tested to AMCA Standards 210 and 300. Meets California Energy Commission (CEC) Title 20 Regulations.
Models CASRE11 through CASRE24 have been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.
Models CASRE11 through CASRE24 are ETL Listed under file numbers 103336443COL-001 and 102628244PRT-001 and comply with UL705 (electrical), and ULC-S645 Standards and CSA Std C22.2, No 113.
Catalog #110CNovember 2024
Ideal for High Temperature, Heavy Grease Applications
The CASRE offers a curb mounted exhaust blower system that is easily installed, delivers exceptional performance and offers a tilt-out wheel for easy access when servicing or cleaning the unit. The motor base and shaft seals provide a double layer of protection to prevent leakage into the building and grease build-up on the motor. An automatic safety lock with manual release ensures safe access to the wheel for cleaning.
Features & Benefits
- Ideal for high temperature, heavy grease applications
- Curb mounted design for easier installation
- Ventilated motor housing for motor, shaft and drive protection
- Tilt out wheel - easy access during maintenance, automatic safety lock with manual release
- Interlocked disconnect switch
- Non-overloading, welded aluminum backward inclined wheel is statically and dynamically balanced and permits usage on high static pressure applications
- Motor base and shaft seals provide a double layer of protection to eliminate water leaks into the building and grease build-up on motor
- 2" grease drain fully welded onto discharge elbow
- Lock and retaining pin - keep wheel centered over the inlet
- Direct Drive Options
- Optional Rain Cap Assembly
View the tilt out wheel in action
Additional Product Views
Certifications
CaptiveAire Systems, Inc. certifies that Models CASRE11 through CASRE24 shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and Publication 311, and comply with the requirements of the AMCA Certified Rating Program. Tested to AMCA Standards 210 and 300. Meets California Energy Commission (CEC) Title 20 Regulations.
Models CASRE11 through CASRE24 have been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.
Models CASRE11 through CASRE24 are ETL Listed under file numbers 103336443COL-001 and 102628244PRT-001 and comply with UL705 (electrical), and ULC-S645 Standards and CSA Std C22.2, No 113.
Catalog #112 CApril 2022